久久精品国产亚洲精品91_在线观看 日韩 福利_国产成人在线小视频_日韩AV免费影院在线观看_惠民福利后入内射国产一区二区_天天影视色欲综合网久久_好男人看的视频2024免费_亚洲激情欧美偷拍_在线观看少妇免费三级_福利十八禁柔术超清视频

The gas assisted injection molding of nitrogen can enter the finished product through the nozzle of the injection machine, and can also enter the finished product through the mold, both of which have their own advantages and disadvantages:

    1. From the nozzle:

    Advantages:

    Modify the existing old mold to use.

    The runners are hollow and reduce the use of plastic.

    The finished product has no trace of the air port left by the air needle.

    Disadvantages:

    All gas channels must be connected.

    The gas channels must be symmetrical and balanced.

    Cannot be used on hot runner systems.

    Machine nozzles need to be replaced and the cost is higher.

    2. Intake from the mold:

    Advantages:

    Multiple inlets can be provided and the gas channels do not need to be completely connected.

    Gas and plastic can be injected at the same time.

    Hot runner design molds may be allowed.

    Can be used for molding of asymmetrical finished cavities.

    Disadvantages:

    The design mold must be re-developed.

    Gas needles will leave air marks.

    Gas-assisted injection molding

The purpose of gas-assisted injection molding is to prevent and eliminate sink marks and shrinkage warpage on the surface of the product, improve surface properties, and make the surface of the product smooth. Gas-assisted injection molding process can be divided into four stages: the first stage is melt injection, that is, the molten plastic melt is injected into the mold cavity, it can be divided into "short injection" and "full injection" . The second stage is gas injection. Gas can be injected at the beginning, middle and later stages of the injection period. The pressure of the gas must be greater than the pressure of the plastic melt to achieve a hollow state of the plastic part. In the third stage, the gas pressure is maintained. When the interior of the plastic part is filled with gas, the part is cooled while maintaining the air pressure. During the cooling process, the gas is pressed from the inside to the outside, so that the outer surface of the plastic part closely adheres to the die wall and passes through. The secondary penetration of gas replenishes the internal volume shrinkage brought about by cooling. The fourth stage is demoulding the parts. With the completion of the cooling cycle, the gas is discharged and the plastic parts are taken out of the cavity. Gas-assisted molding of plastic parts can be roughly divided into three categories: tubular and rod-shaped articles such as clothes racks, armrests, backs, brush sticks, and steering wheels. They mainly use gas penetration to form the air passage to save materials and shorten the molding cycle. Plate-shaped parts such as automobile dashboards and office furniture are mainly to reduce warpage and tonnage requirements for injection molding machines, as well as to improve the rigidity, strength and surface quality of parts; uneven thickness and intricate parts such as household appliances Shells, automotive parts can be simplified by one process.

My company Dongguan Hongbao Electromechanical Technology Co., Ltd. provides you with detailed product price information and product pictures for gas-assisted equipment, gas-assisted water auxiliary systems, and nitrogen-assisted injection molding. This product is warranted for one year and the product is free from man-made damage within one year from the date of purchase. The company is responsible for free maintenance.